Nokia
Nokia Corp. unveiled its new 8260 wireless phone that the company says blends colorful and stylish options into a small digital handset. The 8260 is Time Division Multiple Access 800 compatible, weighs 3.4 ounces, is approximately four inches tall and will include mobile originated short messaging service. Nokia noted that the phone will offer a high-resolution, illuminated display, silver finish keymat, local language support, an internal antenna, side volume keys and a vibrating alert. Available in Electric Blue, Carbon Grey and Red Pepper, Nokia expects the 8260 to offer up to 200 minutes of digital talk time and up to eight days of standby time. (972) 894-5000.
Radio Frequency Systems
Radio Frequency Systems launched its new line of SlimLine microwave antennas specially designed to serve the 6 GHz Spread Spectrum market. Available in diameters ranging from 2 feet to 6 feet, the new antennas are designed to provide the same electrical performance and mechanical strength of earlier models, yet are lower in profile and weigh significantly less for easier handling and reduced tower loading. RFS also introduced an enhanced version of its Optimizer brand adjustable downtilt antenna. The Optimizer Plus features polarization diversity in addition to the continuously adjustable dial-turn electrical tilt process offered by the original. RFS’ cable offerings were also expanded with the introduction of two new lines designed for the wireless industry. RFS said its CellFlex Ultra-Flexible Cable line of premium coaxial cables are 15 percent lighter than standard cable products and feature a tighter bending radius that simplifies handling, speeds installation and reduces tower loading. The company’s new line of Plenum Rated Radiating Cables is designed to be part of distributed wireless communications systems inside buildings where strict building fire code requirements prevail. The Plenum cables use an air dielectric design and have an annular corrugated outer conductor, Teflon insulator and bright blue jacketing to distinguish it from other types of cable. RFS also introduced CellFlex Molded Jumper Assemblies constructed of corrugated copper cables and manufactured using a factory-automated process that solders the inner and outer conductors of the connector to the inner and outer conductors of the cable that is then secured inside an injection-molded enclosure providing strength and a waterproof seal. (203) 630-3311.
SLP InfoWare
Predictive Customer Relationship Management solutions provider SLP InfoWare Inc. launched its Internet Service Provider Loyalty Bundle ISP/CPS, designed to detect subscriber churn, determine the best intervention to retain customers and execute one-to-one marketing campaigns. According to SLP, the solution uses state-of-the-art statistical and machine learning algorithms to quickly analyze customer activity to determine the cause behind churn/attrition behavior. Results of the analysis are automatically incorporated into the solutions modeling technology, which instantly applies multiple statistical techniques to create the most effective model for keeping high-value customers. (617) 742-4102.
Gemplus
Smart card-based solutions provider Gemplus launched GemXplore Suite, an open platform for the deployment of mobile e-services designed for network operators and content providers. Gemplus said the new suite will allow Global System for Mobile communications operators to manage both cards and services from one, future-proof platform. The suite can be modified be plugging in further modules such as Payment gateway or Wireless Application Protocol gateway and can be connected to location and e-mail servers. (650) 654-2900.
Grayson Wireless
Grayson Wireless released the Interpreter Network Analysis Software solution, a wireless network tool that automatically and instantaneously analyzes network data, diagnoses common problems, and evaluates and reports on performance. According to Grayson, the solution can be used during different phases of network deployment, from pre-launch to expansion. To ease problem analysis and evaluate performance, the software solution integrates multidevice data and combines multiple log files to examine large areas simultaneously, the company noted. The interpreter then displays raw air-interface messaging, chart and histogram views of data sets and statistical analysis as well as allows flexibility for plotting and printing by incorporating industry-standard mapping modules and integrated cell site information and identifies service sites on the map. (804) 386-5300.
Andrew
Andrew Corp. claims its new SmartCradle Installed Hands-Free Kit designed exclusively for Motorola StarTAC Series phones enables safe, clear wireless phone conversations while driving. Andrew noted that the kit includes the SmartCradle mounting system, and a speaker and microphone that when installed permits clear conversation using full duplex and eliminating the background noises associated with in-car phones. The cradle includes an integrated charging system for in-vehicle battery charging and an integral antenna connection point and headset jack plug. An optional external antenna can be added to improve signal strength in areas of poor reception. Andrew also introduced factory-installed, right-angle connectors for its SureFlex cable assemblies. According to Andrew, the connectors give the electrical performance of a straight connector with the mechanical advantages of a right angle connector. Andrew uses a factory-automated connector attachment technique that solders both the inner and outer conductors at the cable interface to provide consistent, accurate pin depth. The right angle connectors are available on SureFlex cable assemblies for a variety of sizes of Heliax Superflexible foam dielectric cables. (708) 349-3300.
Antenna Specialists
Antenna Specialists introduced its ASP-7925LF conversion/replacement antenna and the K-749LF replacement NMO-style rooftop trunking conversion antennas designed with a leaf spring contact assemble for NMO-style mounts only. The broadband antennas cover the 806-869 MHz frequency range without tuning, have a 5/8 wavelength upper whip and a 1/4 wavelength lower section providing 3 dB of omnidirectional gain, according to the company. The one piece whip, including phasing coil, stands just over 13-inches high, is constructed of stainless steel with a satin finish and can be removed for car wash clearance. (800) 321-9977.
Times Microwave Systems
Designer and manufacturer of coaxial cables Times Microwave Systems unveiled non-solder EZ TNC male connectors for its LMR-400 and LMR-600 flexible low loss coaxial cables. The connectors, designated as EZ-400-TM and EZ-600-TM, are designed to operate at frequencies up to 6 GHz. TMS noted that the solderless connectors have knurled coupling nuts and crimp-style outer contact attachment rings. Solderless EZ style connectors are also available for most LMR cable sizes covering type N, 7-16DIN and reverse polarity TNC interfaces as well. TMS also introduced a pocket-size connector reference chart and loss calculator for its LMR low loss flexible 50 Ohm coaxial cables. Covering all LMR cable sizes from LMR-200 through LMR-700, the chart-calculator provides loss expressed in dB per 100 feet at the most popular frequencies as well as the most common connectors for the range of LMR cables including BNC, TNC, N and 7-16DIN’s and the electrical and mechanical performance characteristics of LMR cables. (800) 867-2629.
IFR Systems
IFR Systems Inc. launched a new teleservices software module that supports operators and developers of Time Division Multiple Access systems. The module is available for the IFR 1900-4 and the new 1900-5 radio test set platforms allowing designers and operators to simulate broadcast short message services, enabling them to develop enhanced messaging services for ANSI-136 digital cellular mobile phones. IFR also unvei
led its Code Division Multiple Access Auto Station, a test station for
CDMA handsets based on proprietary software licensed directly from Qualcomm Inc. According to IFR, the CDMA test station performs IS-98A parametric testing and allows fully automatic testing of completed handsets including the intermodulation immunity check. The production software also includes calibration capabilities to optimize test system accuracy by compensating for equipment errors and external losses. An optional IFR 2026Q signal generator can produce the single-tone and two-tone interference signals required for some CDMA tests. IFR noted that the tester can handle CDMA-based phones in the cellular, Korean, personal communications services and Advanced Mobile Phone Service bands. In addition, IFR announced improvements in functionality to its 2398 spectrum analyzer through a software upgrade. The new version now includes improvements to the Marker Noise function allowing the Video Detector mode to reset to its original mode before the Marker Noise function is selected. In addition, the Win Mode now supports independent vertical scale settings for the upper and lower zones allowing multiple functions to be observed simultaneously and it’s now possible to Save a Trace with the Average Mode turned on. A free upgrade for customers with the non-updated software is also available for free from regional service centers or by calling IFR. (800) 835-2352.
